Free Next Day Delivery
On selected products ordered before 3pm
Click and Collect
Available within one hour on selected products
Best Prices
We'll Beat any Online Trade Prices
Fast & Free Technical Advice
For technical advice call 07583672586
Available in a number of sheen levels, this clear, 2K Polyurethane Lacquer has been specially formulated for coating Oak and other timber substrates. Sayerlack’s TU61**/00 can achieve the same results in one coat as two coats of conventional PU Lacquer. It exhibits a superb speed of drying enabling sanding in as little as 10 minutes. Displaying good resistance to domestic detergents and foodstuffs, it is ideal for Kitchens and Doors. Activation with TH0727/00 and thinning with DT1150/00.
FEATURES
Mixing Procedure: Part A Part B Thinner | Weight (Kg) TU61**/00 100 TH0727/00 50 DT0040/00 15-20 |
Application: | Conventional or Electrostatic Spray |
Coverage: | 60-150g/m² |
Number of Coats: | Maximum 3 |
Drying Times @ 20°C Dust Free Touch Dry Stackable |
5 Minutes 15 Minutes 2 Hours |
Sanding: | Minimum 4 Hours |
Overcoating: | Minimum 4 Hours |
Pot Life: | 6 Hours |
Solids: | 40 ± 1 |
Gravity (kg/l): | 0,970 ± 0,030 |
Viscosity @ 20°C: | 23” ± 2” (DIN 4) |
VOC Content: | 561 g/l |
PREPARATION
The substrate can be stained with the application of water based stains like AC0600/XX mixed with XX4130/00 binder or solvent based stains like XM8000/XX stain with binder AX2004/00. Denib when dry. For best results, we suggest preparing the surface using 240-320 grit stearate abrasives as they provide a higher efficiency than conventional. Ensure the surface is completely clean of dust and debris before coating.
A preliminary check is recommended for application on very porous wood.
APPLICATION
With good drying conditions and air circulation (20°C), a good build can be achieved with three coats of 150 g/m² with an interval of 60 minutes in between. Lower temperatures and higher relative humidity can lead to longer drying times, but it is possible to speed up drying using heated ovens.
AFTER CARE
Due to the high chemical resistance of Polyurethane Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.
ALTERNATIVE HARDENERS/THINNERS
Sayerlack TH0720/00 @ 50% for increased wettability and non-yellowing.
OTHER
It is important to understand when using a Polyurethane Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.
TU6110/00-6
TU6150/00-6
TU6125/00-6
Our website is currently under maintenance but our team are still here for you. For placing orders, up to date pricing and customer support, please call 03333 208 583 or email hello@industrialwoodcoatings.co.uk.
