SIA 1950 SIASPEED 70MM x 125MM STRIPS

Overview

Sanding is a must-do in any paint or coating project. It is essential for giving your work an amazing smooth finish. To make sanding faster and effortless, we recommend power tools over manual sanding. Orbital Sanding is highly recommended for aggressive sanding due to its proclivity for removing a lot of material.

Choosing the correct abrasive for the job is also important.

1950 siaspeed is the versatile all-round product and is specially designed for high stock removal rates, perfect surface quality and long life in applications such as the surface treatment of body filler, primer filler, lacquers and paints.

Advantages

• Very high abrasive performance with a good finish
• Performance-enhancing grit mix with ceramic corundum in 40 - 80 grit range
• Minimal clogging thanks to open coating in 220 - 600 grit range
• Extremely long lifetime
• Lower abrasive consumption
• Versatile all-round product with an attractive range of options

Applications

Sanding off coatings and impurities

Sanding out unevenness at the edges of repaired surfaces

Flatting bodyfiller and composite materials

Fine sanding primer filler

Keying old and new lacquers

Materials

Colour

Primer filler

Putty

Paints

Old lacquer

Primer coat

Epoxy primer coat

Cathodic dip primer coat

Plastics

Acrylic glas

Gelcoat polyester

Glass-fibre reinforced plastic (GRP)

Technical Info

Usage

PREPARATION

Ensure you have the correct PPE for sanding. We recommend disposable FFP2 Face Masks, as they provide optimum protection from airborne particles such as dust, mist and fumes. FFP2 Masks are suitable for plastering and sanding. Wear eye protections such as safety glasses and goggles to prevent flying debris from sanding. Wear Safety Gloves when using power tools such as sanders and grinders.

Ensure you have the correct backing pad for the Sianet sanding strip.

APPLICATION

Sianet strips are hook and loop and have abrasive-material backing similar to Velcro. The backing pads have microscopic hooks on their surface, while the hook and loop discs have corresponding tiny loops on their backings.

To attach the Sianet strip to your sander, face your sander upside down and place the surface of the disc on the backing pad and press both surfaces together. Ensure all holes are aligned for extraction. Peel back whenever you want to change the strip.

AFTER CARE

Please dispose of the abrasive material correctly. Please seek local advice for dealing with this material.

OTHER

It is important to understand when using abrasives to check whether your full system is suitable for the task in hand. We are able to advise you on sanding equipment and materials to achieve the perfect finish. Please click the contact us button for advice.